CVE-2026-89289

UNKNOWN

Published 2026-10-06 · Source contact@wpscan.com

Description

The Fast Courier WordPress plugin through 5.2.3 does not restrict an unauthenticated REST route that writes order fulfillment data, allowing unauthenticated attackers to overwrite the courier status and customer-facing tracking details of any WooCommerce order by supplying its id.

References

https://wpscan.com/vulnerability/716b6d58-a816-43f2-8a1a-b9fe4f2f9d1d/

View on NVD

Related CVEs

Same severity, most recent

CVE-2026-98372
In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk() iptfs_skb_reset_frag_walk() advances to the fragment containing @offset with an unbounded loop: while (offset >= walk->past + walk->frags[walk->fragi].len) walk->past += walk->frags[walk->fragi++].len; walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced without ever checking fragi against walk->nr_frags. When the requested offset is at or beyond the total length spanned by the walk's fragments, fragi runs past nr_frags and off the end of the fixed-size on-stack frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory. The two callers behave differently: iptfs_skb_add_frags() already guards against this with if (!walk->nr_frags || offset >= walk->total + walk->initial_offset) return len; but iptfs_skb_can_add_frags() has no such guard and calls iptfs_skb_reset_frag_walk() unconditionally, so it performs the out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only afterwards, too late to prevent the read. This is reachable from the receive path: a crafted IP-TFS (AGGFRAG) payload delivered to an IPTFS SA drives iptfs_reassem_cont() -> iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.: BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250 Read of size 4 at addr ffff888008ad7210 by task repro/345 iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392 iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420 iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902 iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280 iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741 xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700 xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104 ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612 Give iptfs_skb_can_add_frags() the same up-front guard that iptfs_skb_add_frags() already has, so the walk is never entered with an out-of-range offset. When it triggers, the caller falls back to the existing linearize-and-copy path, which is safe.
2026-10-06 · score —
CVE-2026-98371
In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.
2026-10-06 · score —
CVE-2026-98370
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix compat ALLOCSPI request use-after-free xfrm_state_netlink() builds the ALLOCSPI response with dump_one_state(), which already calls alloc_compat() with the response skb and header. xfrm_alloc_userspi() then calls alloc_compat() again, but passes the original request skb and its header. For a compat request, the translator therefore interprets the 228-byte compat xfrm_userspi_info as the 232-byte native layout and reads four bytes past the declared payload. It also publishes the translated child through the request's frag_list. A multicast clone of the request shares skb_shared_info and can observe that child. xfrm_user_rcv_msg() frees it after the request handler returns, racing a compat receiver which may still be copying from it and resulting in a use-after-free. Remove the redundant conversion. The response keeps its correct compat translation from dump_one_state(), and no child is attached to the inbound request.
2026-10-06 · score —
CVE-2026-98369
In the Linux kernel, the following vulnerability has been resolved: xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject() syzbot reported a suspicious RCU usage warning in ip6_pkt_drop(): WARNING: suspicious RCU usage in ip6_pkt_drop include/net/addrconf.h:389 suspicious rcu_dereference_check() usage! Call Trace: __in6_dev_get_safely include/net/addrconf.h:389 [inline] ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620 ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651 xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue, the reinjection loop ceased running in softirq context. Workqueue workers run in process context where local_bh_disable() does not enter an RCU read-side critical section under CONFIG_PREEMPT_RCU. Because finish callbacks (such as ip6_rcv_finish) expect to run under an RCU read lock (performing route lookups, l3mdev lookups, and accessing RCU-protected data structures), invoking them in workqueue context without rcu_read_lock() triggers RCU lockdep warnings. Furthermore, packets queued to the workqueue via xfrm_trans_queue_net() may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref). Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev with blackhole_netdev, so dst entries do not keep skb->dev alive while queued in the workqueue. Fix these issues by: 1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the caller's RCU section to ensure dst is reference-counted before queuing. 2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue deferral so skb->dev remains valid during finish() callback processing. 3. Acquiring rcu_read_lock() around the finish callback invocation loop in xfrm_trans_reinject().
2026-10-06 · score —
CVE-2026-98368
In the Linux kernel, the following vulnerability has been resolved: esp: downgrade zerocopy managed frags before mutating skb frags On the out-of-place output path (esp->inplace == false) ESP rewrites the skb frag array: esp_output_head() appends a trailer frag and esp_output_tail() replaces the frags with a destination page, both referenced with get_page(). When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the payload frags are owned by the ubuf and must not be referenced or unreferenced individually, but ESP mutates the frag array without ever downgrading the skb. This breaks the managed-frag invariant two ways: - esp_ssg_unref() walks the source scatterlist and drops a page reference for every frag, including the ubuf-owned payload frags, pushing their refcount below the GUP pin bias while the pages are still pinned, i.e. a use-after-free of the zerocopy pages; - esp_output_tail() installs its destination page as frag 0 with get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so skb_release_data() takes the skip_unref branch and never drops that reference, leaking the x->xfrag page at packet rate. Fix this the way every other frag-mutating site does (__ip_append_data(), __ip6_append_data(), tcp_sendmsg_locked()) and call skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS, so the per-frag unref in esp_ssg_unref() and the frag release in skb_release_data() are both balanced and no mixed-ownership frag array is left behind.
2026-10-06 · score —