CVE-2026-79981The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context while only the 16-bit transaction identifier (ctx->queries[i].id, drawn with sys_rand16_get()) varies per query. RFC 5452 section 9.2 requires both to vary; with a fixed port, an off-path attacker has to guess only the identifier.
The stable port is cheap to learn. Any single observed query reveals it permanently, and it can also be found by probing the ephemeral UDP range: subsys/net/ip/connection.c answers unmatched unicast UDP with an ICMP port-unreachable, so the resolver's socket is the one port in that range that stays silent. Acceptance of a reply is decided solely by get_slot_by_id() matching the transaction identifier and a CRC-16 of the queried name — the reply's source address is never checked (dispatcher_cb() does ARG_UNUSED(addr)), so forged answers need not even be spoofed to appear to come from the configured server; they only need to reach the resolver's port.
An attacker with UDP reachability to the device (same LAN, Wi-Fi or mesh segment, or a globally routable device address) can therefore flood answers for a predictable query name across the 16-bit identifier space during a query window and race the legitimate server. A win makes the application resolve an attacker-chosen address, and with CONFIG_DNS_RESOLVER_CACHE enabled the forged record is retained for its attacker-chosen TTL. The attack still requires winning that race, and applications that validate TLS certificates for the resolved endpoint are largely protected.
The fix draws a fresh local port before each query to a server that has nothing outstanding: dns_randomize_source_port() unregisters the dispatcher, closes and reopens the socket, and re-registers it bound to port 0 so the system selects a new port, raising the per-query guessing space from roughly 16 to roughly 31 bits. Multicast DNS and LLMNR are excluded because their ports are protocol-fixed. The behaviour is controlled by CONFIG_DNS_RESOLVER_RANDOMIZE_SOURCE_PORT (default y).
2026-10-23 · score 6.5
CVE-2026-79980The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide.
This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server.
A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration.
The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.
2026-10-23 · score 5.6
CVE-2026-115796A security flaw has been discovered in Tenda F6 12.02.01.73. This impacts an unknown function of the component Web Management Interface. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.
2026-10-23 · score 4.3
CVE-2026-115813Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.
2026-10-23 · score 5.8
CVE-2026-106074A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`.
If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
2026-10-23 · score 4.8
